The ultimate battery charger for 12.8V (4s) & 16V (5s) LiFePO4 / LFP batteries! OptiMate Lithium LFP Select is perfect for high performance batteries that demand, auto-fast, temp. controlled charging! Program steps - STEP1: Low Volt Start (0.5V). STEP2: TEST before CHARGE STEP3: Temperature check. STEP4: Ultra LOW VOLT SAVE. STEP5: LOW VOLT SAVE cell monitoring. STEP6: TEST cell damage. STEP7: Cell-balancing CHARGE. STEP8: OPTIMIZE. STEP9: TEST after CHARGE. STEP10: OptiMate maintenance. Perfect for 12.8V / 16V LiFePO4 / LFP batteries sized from 2.5 to 200 Ah. Power saving stand-by mode. Full electronic protection against errors Special features: • Battery SAVE mode with BMS reset : starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented. • safeTº :Automatic charge rate adjustment to ambient temperature sensed at the charger. Reduced charging below freezing, no charging if temperature is below -20ºC/-4ºF (can damage lithium batteries). • Ampmatic : Microprocessor adjusts current to ideal LiFePO4 charge curve to match battery size / condition, for fastest and most complete charge. • Protection against incorrect voltage selection : With 16V selected and a 12.8V (4s) battery is connected OptiMate 7 LFP Select will immediately warn that a low voltage is sensed and then not proceed to charging. USER must confirm the nominal voltage of the connected battery is 16V (5s) before SAVE mode activates. During SAVE mode the charge curve is tracked, if the battery appears to be less than a 5-series 16V battery, it will stop charging. SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.
Features & Highlights
- The ultimate battery charger for 12.8V (4s) & 16V (5s) LiFePO4 / LFP batteries! OptiMate Lithium LFP Select is perfect for high performance batteries that demand, auto-fast, temp. controlled charging!
- SAVE: Low Volt Start of 0.5V + 3-step low volt SAVE and TEST; CHARGING AMPS: 9.5A @ 12.8V / 7.5A @ 16V (AmpMatic).
- Model TM-271 IDEAL FOR: LiFePO4 (LFP) 4s / 5s batteries from 2.5 - 200Ah.
- USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C); STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.
- INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
|Item Weight:||1.47 pounds|
|Item Size:||3 x 12.2 x 12.2 inches|
|Package Weight:||3.3 pounds|
|Package Size:||8.4 x 3.2 x 3.2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Tecmate, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: TM-181, ean: 5425006142816,
The world’s most advanced fully automatic 12V battery charger! OptiMate 6 saves batteries that other chargers can’t by recognizing the difference between a discharged or sulphated battery! Program steps - STEP1: Low Volt Start (0.5V). STEPS2: TES...
Why buy from us? On the basis of +15 years of Car Roadside Assistance, XINCOL brand founder Jack Guo invented This Professional Jumper Cable. It is No.1 Choice of Professional Car Dealership and Vehicle Rescue Personnel Features •Genuine Heav...